This application note shows the various relationships and methods needed to extract the diffusion coefficient of an inserted species into a host electrodes using Electrochemical Impedance Spectroscopy (EIS), Potentiostatic Intermittent Titermittent Technique (PITT) and Galvanostatic Intermittent Titration technique (GITT). The main results are that when the system is composed of several charge transfer resistances and double layer capacitances, only EIS can simply lead to the diffusion time constants and hence diffusion coefficients.
Looking for something?
Results in
Document.
Determination of the diffusion coefficient of an inserted species in a host electrode with EIS, PITT and GITT techniques Battery – Application Note 70
Linear vs. non-linear systems in impedance measurements (EIS linearity) Battery – Application Note 9
AN 9. EIS linearity – Electrochemistry & Battery. Electrochemistry
BT-Lab Technical Notes 46: How to properly use the dummy cells for BCS-800
This document will present you how to properly use the Dummy Cells to verify BCS modules.
MT-Lab Technical Notes-07: Temperature calibration of a potentiostat board with an ITS
MT-Lab TN-07: Temperature calibration of a potentiostat board with an ITS TN#07 Materials Science
MT-Lab Technical Notes-06: Calibration of a sample holder
MT-Lab TN-06: Calibration of a sample holder
Inaccuracy of corrosion current determination in presence of ohmic drop Corrosion – Application Note 48
AN48. Ohmic drop - Electrochemistry & Corrosion. Electrochemistry
DC and AC characterization of a Vanadium Redox Flow Battery (VRFB) using a Pinflow 20 cm² test lab cell Battery – Application Note 71
The characterization of Vanadium Redox Battery Cells using BioLogic BCS-815 battery cyclers & a Pinflow® 20 cm² test cell.
EIS Quality Indicators: THD, NSD & NSR Battery & Corrosion – Application Note 64
AN64. EIS Quality Indicators: THD, NSD & NSR. Electrochemistry
EC-Lab Technical Notes 10: “p” low current option: installation and calibration
EC-Lab Technical Notes 10 low current option:
EC-Lab® & BCS-800 with BT-Lab® graphic customization Battery – Application Note 26
AN26, EC-Lab & BT-Lab graphic customization, Electrochemistry
Measurement of non-photochemical quenching using the JTS-150 pump probe spectrometerPhotosynthesis – Application Note 5
This application note describes how to measure non-photochemical quenching using the JTS-150 pump probe spectrometer
THD: parameters affecting its value & comparison with other methods of linearity assessment Battery & Corrosion – Application Note 65
AN65. EIS Quality Indicators THD Electrochemistry
BT-Lab Technical Note 49: Measurements with BCS-800 & BT-Lab® software starting from a negative Ecell value
When working with BCS systems, two validations are necessary when trying to begin a technique with a battery whose initial potential is negative.
EC-Lab Technical Notes 18: Channel board: installation and calibration for VMP2, VMP3, VSP
Technical Notes 18 Channel board: installation and calibration for VMP2, VMP3, VSP
Two questions about Kramers-Kronig transformations (EIS Kramers-Kronig) Battery – Application Note 15
EIS Kramers Kronig - Battery & Electrochemistry
Precision and Accuracy in Coulombic Efficiency Measurements (High Precision Coulometry HPC) Battery – Application Note 53
AN54. High Precision Coulometry HPC. Battery Cycling/Electrochemistry
Battery cycling with reference electrodes using the PAT-cell test cell Battery – Application Note 58
AN58. Reference electrode. Electrochemistry
EC-Lab Technical Notes 47: How to use sequences, loops, and cycles in EC-Lab® and BCS-800’s BT-Lab® software?
The differences between cycles, loops and sequences and how they can be used to configure cleaner, more structured experiments and simplified data display/analysis
Staircase Potentio Electrochemical Impedance Spectroscopy (SPEIS) and automatic successive ZFit analysis Battery – Application Note 18
AN 18. EIS Zfit - Electrochemistry, Battery & corrosion. Electrochemistry
UFS-SEC: SpectroElectrochemical Cell for UV-Vis, NIR and IR measurement Spectroelectrochemistry – Application Note 52
AN52. Spectroelectrochemistry. Electrochemistry
Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture Material Science – Application Note 1
AN1. Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture. Materials Science
How to use BioLogic products to test batteries – Tutorial – Battery
Configuration, DC techniques, Impedance spectroscopy, Processing data
Height tracking with the SKP370 or SKP470 module Scanning Probes – Application Note 1
AN 1. Height tracking with the SKP370 or SKP470 module. Scanning Probe Electrochemistry.
CIL-102 binds to tubulin at colchicine binding site and triggers apoptosis in MCF-7 cells by inducing monopolar and multinucleated cells
CITATION: K.K. Gireesh, Aijaz Rashid, Soumyananda Chakraborti, Dulal Panda, Tapas Manna
ZFit and equivalent electrical circuits (EIS Equivalent Circuit) Battery – Application Note 14
AN14. EIS Equivalent Circuit – Electrochemistry & Battery Application. Electrochemistry
Supercapacitor characterization by galvanostatic polarization method (DC characterizations) Supercapacitor – Application Note 51
AN51. DC characterizations - Supercapacitor. Electrochemistry
SCAN-Lab Technical Notes 03: Relating Work Function Difference Measured by Scanning Kelvin Probe (SKP) to Corrosion Potential.
Practical methods to correlate the SVP voltage to a current at a sample’s surface
Instrument & Quartz Crystal Microbalance (QCM) coupling: Mass measurement during polypyrrol film deposition Electrochemistry – Application Note 13
AN13. eQCM - Electrochemistry. Electrochemistry
Equivalent model of electrochemical cell inc. ref. electrode impedance and potentiostat parasitics Battery – Application Note 44
AN44. EIS artifacts precautions. Electrochemistry
SKP imaging example of a corroded Zn-plated Fe sample Scanning Probes – Application Note 9
Application Note 9. AN 9. Scanning Probe Electrochemistry.
Constant power technique and Ragone plot Battery & Electrochemistry – Application Note 6
AN6. Ragone plot. Electrochemistry
Drift correction in electrochemical impedance measurements (EIS non stationarity) Battery – Application Note 17
AN17. EIS non stationarity - Electrochemistry, Battery & Corrosion. Electrochemistry
Electrochemical Noise Measurements Part I: ASTM assessment and validation of instrumental noise Corrosion – Application Note 39-1
AN 39-1. Electrochemical noise measurement ENA ASTM #1 .Electrochemistry
Electrochemical Noise Measurements: Part II: ASTM assessment on a real electrochemical system Corrosion – Application Note 39-2
AN 39-2. Electrochemical noise measurement ENA ASTM #2. Electrochemistry
Differential Coulometry Spectroscopy (DCS) Battery – Application Note 57
AN57. DCS & DCA. Electrochemistry
A comprehensive solution to address battery module/pack Energy Storage – Application Note 59
AN59. Pack fuel cell/ stack module battery. Electrochemistry
High current (DC and EIS) measurements on electrolyzers Electrolyzers – Application Note 63
AN 63.High current (DC and EIS) measurements on electrolyzers. Electrochemistry
Electronic conductivity measurement – DC/AC methods Material Science – Application Note 3
AN 3. Electronic conductivity measurement using DC and AC method. Materials Science
How to interpret lower frequencies impedance in batteries (EIS low frequency diffusion) Battery – Application Note 61
AN61. EIS low frequencies diffusion - Battery. Electrochemistry