Cables
High temperature extension cables
Climate chamber ready extension cables.
From -40°C up to 150 °C, available in 1.3 m or 2.5 m long.
Description
The extension cables are intended to be connected between the instrument’s cell cable and the cell.
Available in two different sizes, 1.3 m and 2.5 m long and with a maximum temperature of 150 °C, these cables are compatible with all cables of :
- SP-50e, SP-150e, VSP, VSP-3e, VMP-3e and boosters for Essential range instruments (20 A maximum)
- SP-200, SP-240, SP-300, VSP-300, VMP-300, and boosters for Premium range instruments (20 A maximum)
- BCS-805, BCS-810 and BCS-815
This compatibility has been made possible because of their multiple input and output connectors:
- 8 input receptacles
- 2x “2 mm receptacles” for the power (P+ and P-)
- 2x “4 mm receptacles” for the power (P+ and P-)
- 3x “2 mm receptacles” for the sense (S+, S- and Ref)
- 1x “4 mm GND receptacles”
- 8 output banana plugs
- 2x “2 mm banana plugs” for the power (P+ and P-)
- 2x “4 mm banana plugs” for the power (P+ and P-)
- 3x “2 mm banana plugs” for the sense (S+, S- and Ref)
- 1x “4 mm GND banana plugs”
More information inside the “Specifications” tab.
Specifications and ordering information
| 1,3 m | 2,5 m | ||
|---|---|---|---|
| Temperature /°C* | |||
| Max current by using 2 mm input/output /A | |||
| Max current by using 4 mm input/output /A | |||
| Cable diameter /mm | |||
| 2 mm | Resistance /mOhm** | < 95 | < 180 |
| Open circuit capacity /pF | < 155 | < 340 | |
| Short circuit inductance /nH | < 20 | < 30 | |
| 4 mm | Resistance /mOhm** | < 25 | < 40 |
| Open circuit capacity /pF | < 155 | < 340 | |
| Short circuit inductance /nH | < 195 | < 455 | |
| Part number | 092-25/1 | 092-25/2 | |
*Only for the cables and output banana plugs. Input receptacles can only be used up to 80°C maximum.
**These resistances will not be measured in a 4-point configuration. The compensation analysis tool can also be used if 2-point measurements are performed. The compensation analysis tool can also be used to compensate the open circuit capacity as well as the short circuit inductance.
Description
The extension cables are intended to be connected between the instrument’s cell cable and the cell.
Available in two different sizes, 1.3 m and 2.5 m long and with a maximum temperature of 150 °C, these cables are compatible with all cables of :
- SP-50e, SP-150e, VSP, VSP-3e, VMP-3e and boosters for Essential range instruments (20 A maximum)
- SP-200, SP-240, SP-300, VSP-300, VMP-300, and boosters for Premium range instruments (20 A maximum)
- BCS-805, BCS-810 and BCS-815
This compatibility has been made possible because of their multiple input and output connectors:
- 8 input receptacles
- 2x “2 mm receptacles” for the power (P+ and P-)
- 2x “4 mm receptacles” for the power (P+ and P-)
- 3x “2 mm receptacles” for the sense (S+, S- and Ref)
- 1x “4 mm GND receptacles”
- 8 output banana plugs
- 2x “2 mm banana plugs” for the power (P+ and P-)
- 2x “4 mm banana plugs” for the power (P+ and P-)
- 3x “2 mm banana plugs” for the sense (S+, S- and Ref)
- 1x “4 mm GND banana plugs”
More information inside the “Specifications” tab.