5 min read

EC-Lab Technical Notes 18: Channel board: installation and calibration for VMP2, VMP3, VSP

Latest updated: August 16, 2021

Introduction

This technical note explains how to install and calibrate a channel board in an existing chassis. The note will describe the physical installation of a channel board in a chassis and how to calibrate the boards with EC-Lab® software. Every new instrument delivered by BioLogic is ready for use. The procedure described in this Technical Note is aimed at users who wish to add additional channel boards to their instrument. Before adding new channel boards to an existing system, it is necessary to upgrade the software and the firmware with the latest version of ECLab® using the CD-ROM provided with the new channel boards.

Related files

EC LAB TN18 Channel board installation and calibration for VMP2 VMP3 VSP

You cannot access this resource because you are not logged in. Log in